Tec2Screen® simulation (20/20): Furnace door control system

Tec2Screen® simulation (20/20): Furnace door control system


The Tec2Screen® simulations make it easier to get started with PLC programming. Realistic, graphical examples guide the user step-by-step through the complex program sequences.

A hydraulic cylinder controlled via pushbuttons on a control console opens and closes the door of a hardening furnace. To avoid dangerous situations, a light curtain monitors the furnace opening and stops the travel if a light beam is interrupted.

Required Connects
2x Digital I/O Connect

Required accessories
Programmable logic controller, e.g. in the EduTrainer® Universal or EduTrainer® Compact, with at least:
– 6 digital inputs
– 2 digital outputs

To perform the simulation, you require Tec2Screen Manager 20/20, which you can install free of charge". It allows 20 users to work simultaneously on 20 workstations.

If you don’t want to purchase a Classroom Manager Cloud, you can download the Tec2Screen® Manager 20/20 free of charge. The following license level is available for the courses & simulations:

  • 20 users at 20 workstations

Training content

  • Simple logic operations