Stacking magazine module

Stacking magazine module

The Stacking magazine module separates workpieces or end caps. A double-acting cylinder pushes the workpiece at the bottom out of the gravity-feed magazine. The cylinder position is detected electrically by inductive, three-wire sensors. The speed with which the cylinder extends and retracts can be infinitely adjusted via one-way flow control valves. Through-beam sensors or diffuse sensors can be attached to the magazine. The magazine offers mounting options for installation on a profile, profile plate or at conveyor height via an optional adapter. It is possible to eject products from three magazines at a common position. The module is supplied completely assembled.

Training content

  • Basic principles of pneumatics
  • Sensor technology: magnetic limit switches
  • Sensor technology: opto-electrical sensors
  • Connecting tubing and wiring
  • Reading circuit diagrams

Technical data

  • Operating pressure: 600 kPa (6 bar)
  • Power supply: 24 V DC
  • 3 digital sensors
  • 1 digital actuator
  • Length with workpiece holder: 310 mm
  • Length without workpiece holder: 240 mm

Scope of delivery

  • Plastic injection-molded cylinder body and ejector
  • Magazine tube for end caps and cylinder bodies with diameter/edge length = 40 mm
  • Mini I/O terminal
  • 5/2-way single solenoid valve
  • Double-acting cylinder
  • 2 magnetic limit switches
  • Through-beam sensor
  • Mounting accessories for profile plate
  • Workpiece holder (only with order no. 8032171)

Type