EduTrainer® Universal preferred versions MPS®: A4 rack with Festo CECC-LK CODESYS® V3.5

EduTrainer® Universal preferred versions MPS®: A4 rack with Festo CECC-LK CODESYS® V3.5

Nou 

World language IEC 61131-3

The CECC controllers are the latest generation of compact controllers from Festo. A CECC controller can be programmed for IL, LD, FBD, ST, SFC and CFC with CODESYS® provided by Festo in accordance with IEC 61131-3.

 

 

 

 

 

Festo CECC-LK (MPS)

  • 4 x IO-Link master
  • 1 x IO-Link device
  • Ethernet connection
  • USB connection
  • CANopen


Inputs/outputs:

  • 12 digital inputs (24 V DC)
  • 8 digital outputs (24 V DC, 500 mA)

IO-Link extension module:

  • 8 digital inputs (24 V DC)
  • 8 digital outputs (24 V DC, 500 mA)


CODESYS®
CODESYS® is a development environment for programmable logic controllers (PLC) in accordance with the IEC 61131-3 standard for application development in industrial automation.

The point-to-point communication of the IO-Link interface enables a simple and safe three-conductor wiring between the controller, sensors or actuators, and also makes remote parameterization possible. A wide variety of IO-Link devices are available on the market. They are mostly sensors, actuators or a combination of these as well as special IO-Link nodes to increase the number of inputs/outputs or to use standard sensors and actuators.
CODESYS_neu_c.jpg
The mounting system

  • EduTrainer® A4 rack, desktop variant, size 1, (W x H) 305 mm x 300 mm
  • 19" module simulation plate with 2x SysLink plug connector for MPS® station and control panel, each with 8 digital inputs and 8 digital outputs and 1x Sub-D 15-pin plug connection with 4 analog inputs and 2 analog outputs, emergency stop jumper to connect a safety circuit for disconnecting 8 digital outputs.
  • Integrated power supply unit 110/230 V/24 V, 4 A
  • Can be placed on a desk or in an MPS® station.
  • Stable, powder-coated, sheet-steel mounting system
  • Can be extended with 19" simulation modules

Notes
The CODESYS® V3.5 programming software can be downloaded for free on the Festo website.