
The modular mini control system from Siemens
For solutions in discrete and stand-alone automation applications in the lower performance range. The family of SIMATIC S7-1200 controllers is equipped with an integrated engineering system: SIMATIC STEP 7 Basic for controller and HMI.
EduTrainer® Compact with CPU S7-1215C (order no. 8096455, 8096457)
- Digital inputs on 4 mm safety sockets and switches/pushbuttons for signal simulation
- Voltage distribution, each with 8 x 24 V/0 V on 4 mm
- Digital outputs on 4 mm safety sockets
- Analog inputs and outputs on 4 mm safety sockets
- 75 kB RAM, 4 MB loading buffer
- Interface: 2x RJ45
- 14 digital inputs (24 V DC)
- 10 digital outputs (24 V DC, 500 mA)
- 2 analog inputs (0 – 10 V)
- 1 analog output (±10 V DC, 0 – 20 mA)
EduTrainer® Compact with CPU S7-1215C (order no. 8096456, 8096458)
- Digital inputs on 4 mm safety sockets and switches/pushbuttons for signal simulation
- Digital outputs on 4 mm safety sockets
- Analog inputs and outputs on 4 mm safety sockets
- Simulation module with 2 x SysLink plug connectors for MPS® stations and control panel with digital inputs and outputs and Sub-D, 15-pin plug connection with analog inputs and outputs; 4 mm safety sockets for emergency stop jumper to connect a safety circuit for digital outputs
- 75 kB RAM, 4 MB loading buffer
- Interface: 2x RJ45
- 14 digital inputs (24 V DC)
- 10 digital outputs (24 V DC, 500 mA)
- 2 analog inputs (0 – 10 V)
- 1 analog output (±10 V DC, 0 – 20 mA)
EduTrainer® Compact with CPU S7-1214C (order no. 8115009)
- Digital inputs on 4 mm safety sockets and switches/pushbuttons for signal simulation
- Digital outputs on 4 mm safety sockets
- Analog inputs and outputs on 4 mm safety sockets
- Simulation module with 2 x SysLink plug connectors for MPS® stations and control panel with digital inputs and outputs and Sub-D, 15-pin plug connection with analog inputs and outputs; 4 mm safety sockets for emergency stop jumper to connect a safety circuit for digital outputs
- 50 kB RAM, 2 MB loading buffer
- Interface: 1x RJ45
- 14 digital inputs (24 V DC)
- 10 digital outputs (24 V DC, 500 mA)
- 4 analog inputs (±10 V DC, 0 – 20 mA)
- 2 analog outputs (±10 V DC, 0 – 20 mA)
The mounting system
- EduTrainer® Compact for ER mounting frame
- Height x depth x width approx.: 170 x 80 x 364 mm
- Suitable for ER mounting frame or tabletop stand-alone
- Lightweight, injection-molded housing
- The units are shipped fully assembled
Special license rules apply for schools and educational institutes in the commercial sector.
Notes
*Order nos. 8096455 and 8096456 are based on Siemens SCE Trainer Packages and contain six EduTrainers® each, including programming cable (Ethernet cable) and programming software STEP 7 Basic. When Siemens updates these Trainer Packages, the controllers will be promptly replaced by successor models. Subject to technical implementation.
**Order nos. 8096457, 8096458 and 8115009 contain one EduTrainer® without programming cable (Ethernet cable) and programming software. The programming software Step 7 can be ordered in different packages at www.festo-didactic.com.
Recomandări pentru accesorii, mijloace media şi extensii
- I/O data cable with SysLink connectors (IEEE 488) (Cod comandă 34031)
- Analog cable, parallel (Cod comandă 529141)
- Power supply unit for mounting frame
- 4 mm Safety laboratory cables, 106 pieces, red, blue, and black (Cod comandă 8092668)
- Ethernet cable
- PLC programming in accordance with IEC 61131: WBT
- STEP 7 Trainer Package for 6 users (Cod comandă 8066478)
- STEP 7 Upgrade Trainer Package for 6 users (Cod comandă 8066479)
- STEP 7 Software for Students for 20 users (Cod comandă 548576)
- STEP 7 Basic Upgrade Trainer Package for 6 users (Cod comandă 8047777)
- STEP 7 Software for Training for 1 user (Cod comandă 548575)