KNX EduTrainer® heating actuator

KNX EduTrainer® heating actuator

The heating actuator controls the heating water circuits in heating systems. The interior of the valve is visible, and an integrated gauge shows the stroke of the plunger. The valve is supplied entirely via the KNX bus. Two binary inputs are available as presence and/or window contacts and can be controlled via switches or external signals. The plate also contains the KNX system distributor for 230 V.

The locations of all connections are standardised and are routed to safety sockets or system plugs.

Technical data

  • Input voltage: 1 x 230 V AC
  • Output voltage: 1 x 230 V AC
  • Electric motor functional principle, automatic limit stop connection, controller stroke 6 mm, run-time < 20 s/mm, control force > 120 N
  • Display of valve stroke via LEDs
  • Gauge triggering: 0.01 mm
  • Front panel: 266 x 297 mm
  • Console housing with rubber feet for use in an A4 frame or on a table
  • Connection via 4 mm safety plugs
  • Connections for KNX bus via KNX bus plug connectors