Tec2Screen® simulation (20/20): Belt control systems

Tec2Screen® simulation (20/20): Belt control systems

The Tec2Screen® simulations make it easier to get started with PLC programming. Realistic, graphical examples guide the user step-by-step through the complex program sequences.

Two conveyors feed bulk material onto a third belt. The infeed conveyors are actuated via a control console, with the operating status indicated by LEDs. The outfeed conveyor starts or stops automatically when the infeed conveyors are operating. Touching and holding a conveyor simulates a fault. The conveyor then stops and outputs an error message in the control console.


Required Connects

4x Digital I/O Connect

Required accessories
Programmable logic controller, e.g. in the EduTrainer® Universal or EduTrainer® Compact, with at least:
– 2 digital inputs
– 9 digital outputs

To perform the simulation, you require Tec2Screen Manager 20/20, which you can install free of charge". It allows 20 users to work simultaneously on 20 workstations.


If you don’t want to purchase a Classroom Manager Cloud, you can download the Tec2Screen® Manager 20/20 free of charge. The following license level is available for the courses & simulations:

  • 20 users at 20 workstations

Training content

  • Dependencies and timing

 

Typ