12 V Lead-Acid Batteries

12 V Lead-Acid Batteries

The 12 V Lead-Acid Batteries consists of two 12 V batteries mounted in an A4 module. It consists of two similar rechargable batteries, each with it's own protection, a common charging input and a battery voltage check.


  • Two 12 V rechargeable VRLA (valve regulated lead acid) batteries, auto-reset over current protected
  • The batteries can be connected in series or parallel
  • Common charging input to condition both batteries at the same time
  • Push button activated battery voltage check with numeric display and battery selector
  • Protective conductor connection, 4 mm² minimum diameter and deliberately unmistakable with 4 mm safety plug connections to prevent mix-up

Technical data    

  • Two(2) VRLA (valve regulared lead acid) batteries
  • Nominal voltage: 12 V (each battery)
  • Nominal capacity: 2.3 Ah (each battery)
  • Maximum charge current: 0.92 A (both batteries)
  • Maximum Discharge Current: 5 A (each battery)
  • Fuse: 5 A (auto reset, each battery)
  • Test point fuse: 0.1 A (auto reset)
  • Designed for A4 mounting frames   
  • Dimensions (H x W x D): 297 x 133 x 140 mm
  • Weight: 3.5 kg