Analog I/O terminal

Analog I/O terminal

Analog signals are routed to a special analog terminal with a 15-pin Sub-D socket. It is used to wire four analog inputs and 2 analog outputs which are connected to a socket. Contact is established via spring-loaded terminals. LEDs are included on the input and output terminals which make it easy to monitor the status and enable systematic troubleshooting. The terminal can be mounted on an H-rail.

Technical data

  • 24 V/0 V terminals
  • Current inputs: 4
  • Current outputs: 2
  • Voltage inputs: 4
  • Voltage outputs: 2
  • Spring-loaded terminal: 0.2 – 1.5 mm2
  • 15-pin Sub-D socket
  • Status LEDs
  • Dimensions (W x D): 68 x 77 mm

Scope of delivery
Terminal with H-rail mounting