Robot interface box - Add-on for robot station

Robot interface box - Add-on for robot station

The Robot interface box allows the robot controller to undertake additional PLC functions.

Up to 16 robot controller I/Os can be distributed to 4 SysLink sockets with the Robot interface box. The Robot interface box is connected to the robot controller’s I/O card via a 50-pin Centronics connector. On the front panel are LEDs to display the status of the robot I/Os. On the rear panel are 4 SysLink sockets for connection to peripherals.

 

 

Customer Service Line:
Deutschland +49/(0)711/3467-0