Packaging module

Packaging module

New 

The Packaging module is responsible for handling the boxes. The thrust cylinder separates and unfolds the boxes from the magazine. The guide cylinder unfolds the upper section of the box, pushes the closing flap and then fixes the box lid by advancing the stop cylinder to lower the workpiece into it afterwards. As soon as the provided box is filled and the guide cylinder is moved into the initial position, the box can be sealed with the folding mechanism. The sealed box can then be removed.

Technical data

  • Power supply: 24 V DC
  • Operating pressure: 600 kPa (6 bar)
  • Square/round workpiece dimensions: max. 40 mm
  • Box dimensions (L x W x H): 48 x 42 x 50 or 60 mm
  • Interfaces: 15-pin D-Sub-HD
  • 4 digital sensors
  • 4 digital actuators   


Scope of delivery

  • Module fully assembled and set
  • Sensors: 4 x reed contact
  • Valve: 4 x 5/2-way valve
  • Mounting material for profile plate


Technical datasheet

  • 50 x box size 1
  • 50 x box size 2

 

Customer Service Line:
Deutschland +49/(0)711/3467-0