The measuring module SMAT is mounted on an MPS® station with a conveyor and measures the height of the workpieces. For the measuring procedure, a workpiece is pulled from the conveyor onto the plane table.
A second cylinder then advances and checks the height of the workpiece via an analogue sensor (SMAT). After the measuring procedure, the workpiece is pushed back onto the conveyor. The analogue signal can be digitised with an optional signal converter (order no. 549844).
- 4 x input for sensor, digital (PNP)
- 1 x input for sensor, analogue 0 – 10 V (SMAT)
- 2 x output for actuator, digital
- 1 x supply port (6 bar)