This combination of TURN 105 and MILL 105 facilitates an efficient implementation of a CNC machine production line for turning and milling operations.
Automatic control and loading/unloading of the CNC machine is undertaken by a 6-axis RV-2FB industrial robot that travels on a linear axis. Unmachined parts are fed to the first production process via 2 conveyors. This facilitates feeding of two different unmachined parts, for example aluminium and brass. The workpieces undergo turning and milling in sequence and are then placed on the third conveyor.
Controlling, programming, simulating: the software solutions for MicroFMS
- Simple CAD/CAM system for turning and milling
- 3D simulation for turning and milling
3-axis milling machine with automatic door and robotics interface, mounted on table with profile plate. PC with selectable CNC controller interface for milling machine, on bench.
Turning machine with automatic door and robotics interface, mounted on table with profile plate. PC with selectable CNC controller interface for turning machine, on bench.
Parts buffer station
1 station with three conveyor belt buffers, mounted on trolley with profile plate. Conveyor 1 and 2 for buffering and separation of cylindrical unmachined parts size 30 or 40 mm. Conveyor 3 for buffering and/or separation of cylindrical finished parts with a base area of at least 30 mm diameter.
6-axis industrial robot with pneumatic finger grippers mounted on linear axis.
Linear axis with toothed belt drive
- Stroke length: typically 2000 mm, dependent on layout
- Precise and firm guidance through linear ball bearing
- Drive motor: AC servo motor
- Output: 0.2 kW
- No-load speed: 3000 rpm
- Positioning: Incremental rotary transducer
For further technical details, see MR6 and TR6.