Workstation accessories

Workstation accessories

New 

Users shall find most fasteners, tools, and measuring apparatus required for the suggested experiments in this package.

It shall include various lengths of cap screws with a single hexagonal socket drive size so that only one tool is required to fix components to the T-slotted extrusions. A compartmented box with two handles shall be included to store, organize and quickly identify fasteners.

The main components of this package shall include:

  • 34x zinc finish flat washers
  • 34x roll-in T-nuts
  • 10x round-end shaft keys
  • 2x anodized aluminum risers
  • Assortment of 52x hexagonal socket head cap screws of 5 different lengths
  • Assortment of shims of various thicknesses and colors ranging from 0.05 mm to 1.50 mm
  • 1x hasp, two padlocks and two “Danger” tags
  • 1x dial indicator kit with a gauge travel of 25 mm and magnetic base plus support to attach to the workstation extrusions.
  • 1x combination square
  • 1x 25 leaves feeler gauge with thicknesses from 0.04 mm to 1 mm
  • 1x combination, contact/photo digital tachometer with LCD display
  • 1x tape measure
  • 1x sand belt
  • 1x soapstone holder and 5x soap-stones
  • 1x pair of needle nose pliers
  • 1x 610 mm long straight-edge with a straightness tolerance of  -0.127 mm to +0.127 mm
  • 1x digital caliper with a 0.01 mm resolution and an LCD display
  • 1x nine piece hexagonal key set of 1.5 mm to 10 mm size with ball profile on the long arm
  • 1x 6 mm size, two-tip ball profile T-handle hexagonal key
  • 1x 3 mm size, two-tip ball profile T-handle hexagonal key
  • 1x compartmented box with two handles, divided in 12 sections with identification labels
  • 1x prony brake with two spring scales, a friction belt, an aluminum pulley, a plastic bottle and a belt tension adjustment tool

 

 

Customer Service Line:
Deutschland +49/(0)711/3467-0