Belt drives 2

Belt drives 2

New 

This package shall include all the hardware to teach additional belt drives skills. Various types of common pulleys and belts shall be included for students to experiment with proper installation and maintenance procedures. Pulleys shall be stored on panels for identification and inventory control. Each panel shall have two handles for moving and positioning.

A student manual (sold separately) available in both paper and digital formats shall include theory and detailed step-by-step exercises involving components commonly found in belt drives. Topics shall include:

  • Wedge and cogged belts
  • Multiple-belt drives
  • Multiple-speed belt drives
  • Variable-speed belt drives
  • Synchronous belt drives
  • High torque synchronous belt drives
  • Pulley idlers

The main components of this package shall include:

  • 2x v-belt profile step-cone pulley with 3 grooves and a bore diameter of 14 mm, with keyway and M6 setscrew.
  • 2x 24 teeth timing belt pulleys with a bore diameter of 14 mm, with keyway and M6 setscrew.
  • 1x HTD, 24 teeth timing belt pulley with a 14 mm bore diameter taper bushing, with keyway.
  • 1x HTD, 30 teeth timing belt pulley with a 14 mm bore diameter taper bushing, with keyway.
  • 1x single-groove variable pitch pulley with a bore diameter of 14 mm, with keyway and M6 setscrews.
  • 1x profile SPA double groove pulley with a nominal diameter of 90 mm, a 14 mm bore diameter taper bushing and keyway.
  • 1x profile SPA double groove pulley with a nominal diameter of 125 mm, a 14 mm bore diameter taper bushing and keyway.
  • 1x 30 mm diameter tensioning roller
  • 1x belt with v-belt profile and 1270 mm outside circumference
  • 2x belt with v-belt profile and 1000 mm reference length
  • 1x cogged XPA profile belt with 1000 mm reference length
  • 1x profile T timing belt with 98 teeth
  • 1x HTD timing belt with 120 curved teeth

 

Type

 

Customer Service Line:
Deutschland +49/(0)711/3467-0