Hydraulic power pack with two constant-displacement pumps

Hydraulic power pack with two constant-displacement pumps

Especially suitable for separate supply of two hydraulic circuits each with its own ON/OFF switch e.g. on a mobile Learnline workstation. Equally recommended for reaching higher speeds in cylinders and motors. Also ideal for producing valve characteristic curves.

 

 

 

 

 

 

  • Can be integrated into mobile Learnline workstation systems
  • Pump design: 2 x external gear motor each with pressure relief valve adjustable from
    0 – 6 MPa (0 – 60 bar)
  • Operating pressure 6 MPa (60 bar)
  • Two motors with overload protection, and each with an ON/OFF switch on the Quick-Fix mounting system
  • Rated output: 2 x 550 W
  • Tank: 40 l volume, sight glass, temperature display, drain screw
  • Tank lid with air filter and return filter
  • Low-leakage, self-sealing coupling nipples for P and T
  • Plug socket for unpressurised return
  • Connecting flange for measuring container return
  • Dimensions: 700 x 320 x 550 mm (W x D x H)
  • Weight: 72 kg (empty)

Variant for AC 230 V/50 Hz

  • Power pack with AC motors, single-phase and start capacitors
  • Delivery rate: 2 x 3.4 l/min

Variant for AC 120 V/60 Hz

  • Power pack with AC motors, single-phase and start capacitors
  • Delivery rate: 2 x 4.3 l/min (2 x 1.1 gpm)

Variant for AC 400 V/50 Hz

  • Power pack with AC motors, three-phase
  • Delivery rate: 2 x 3.4 l/min

Note
For safety reasons the hydraulic power packs are not filled with oil when delivered. Please order the oil separately.

Type

 

Customer Service Line:
Deutschland +49/(0)711/3467-0