The power supply unit for all tests for the basic principles of electrical engineering/electronics.
The integrated adjustable direct current source is expanded with fixed voltages for digital and control technology, with alternating and three-phase current sources completing the range of options.
The function generator provides different output forms in a broad frequency range and covers all requirements for basic training.
The integrated display supplies detailed information concerning actual settings at all times. The operating status of the outputs is indicated by LEDs, and all outputs are protected against short-circuits and overloads.
In combination with the optional PC software, all settings can also be made from the PC over the integrated computer interface.
- Input voltage:
1 x 100 - 230 V AC (50 - 60 Hz)
DC 0 – 25 V, 0.3 A
DC +5 V, 0.2 A
DC ±15 V, 0.8 A
AC 2x 18 V, 100 mA
3 AC 12 Veff, 0.1 A, 0.1, 1, 50, 60 Hz
- Function generator:
Triangle, sinusoidal, square (symmetrical, V = 2), TTL
Frequency 1 Hz – 100 kHz
Amplitude 0 – 10 V
Offset -10 – +10 V
Max. current 0.1 A
- All outputs are protected against short circuits and overload
- The output voltage is displayed with LEDs
- Front panel: 133 x 297 mm
- Console housing with rubber feet for use in an A4 frame or on a table
- Connections for 2 mm and 4 mm safety plugs
- USB connection for PC