EduTrainer® basic power supply unit with integrated measuring module

EduTrainer® basic power supply unit with integrated measuring module

The power supply unit for all tests for the fundamentals of electrical engineering/electronics.

The integrated adjustable direct current source is expanded with fixed voltages for digital and control technology, with alternating and three-phase current sources completing the range of options.

The function generator provides different output forms in a broad frequency range and covers all requirements for basic training.

The integrated display provides detailed information on the current settings at all times. The ready status of the outputs is indicated by LEDs. All outputs have short circuit and overload protection.

In combination with the optional PC software, all settings can also be made from the PC via the integrated computer interface.

The integrated measurement module is used to record and represent voltage and current on the PC.

Technical data

  • Input voltage:
    1 x 100 - 230 V AC (50 - 60 Hz)
  • Outputs:
    DC 0 – 25 V, 0.3 A
    DC +5 V, 0.2 A
    DC ±15 V, 0.8 A
    AC 2x 18 V, 100 mA
    3 AC 12 Veff, 0.1 A, 0.1, 1, 50, 60 Hz
  • Function generator:
    Triangle, sinusoidal, square (symmetrical, V = 2), TTL
    Frequency 1 Hz – 100 kHz
    Amplitude 0 – 10 V
    Offset -10 – +10 V
    Max. current 0.1 A
  • All outputs have short circuit and overload protection
  • The output voltages are indicated by LEDs
  • Front plate: 133 x 297 mm
  • Control console housing with rubber feet for use in A4 frame or on tabletop
  • Connection for 2 mm and 4 mm safety connectors
  • USB connection for PC

 

Recommendations for accessories, media and extensions

 

Customer Service Line:
Deutschland +49/(0)711/3467-0