Wind Turbine Generator/Controller

Wind Turbine Generator/Controller

New 

The Wind Turbine Generator and Controller consists of an industrial wind turbine generator and controller of a real small wind turbine. By coupling it to our dynamometer, different wind situations can be simulated and the behavior of the small wind turbine can be examined. The integrated charge controller allows the generated energy to be stored in batteries. Finally, with the help of inverters, AC consumers can be operated.

Features

  • Battery charging function with adjustable voltage output, LED status indicator and interruptor switch
  • Mechanical and over temperature protection are integrated to provide maximum safety for users and equipment
  • Protective cover sensor with LED indication, provides safe switch off and prevents unintended start of the motor
  • Front pins on base allows side by side alignment with dynamometer
  • Pulley allows side by side mechanical linking with dynamometer
  • Protective conductor connection, 4mm² minimum diameter and deliberately unmistakable with 4mm safety plug connections to prevent mix-up

Technical Data

  • Three-Phase Permanent Magnet Synchronous Generator
  • Turbine type: Direct-drive, fixedpitch
  • Nominal power: 200 W at a wind speed of 12.5 m/s
  • Charge voltage setpoint range: 54.4 – 68.0 V
  • Recommended battery pack voltage: 48 V
  • Diode rectifier: 110 V – 5 A
  • Dimensions (H x W x D): 211 x 200 x 370 mm
  • Weight: 8.7 kg

 

 

Customer Service Line:
Deutschland +49/(0)711/3467-0