Interfaces to the process

Interfaces to the process

With an EduTrainer® or any PLC, you can control the process of your choice. The programmer (PC), controller and processes are connected via various interfaces.

1. Simulation of the PLC inputs and display of the PLC outputs
Testing a PLC program using the simulation box.

d573882uc.jpg
EduTrainer® or PLC of your choice

      d167197g.jpg

I/O data cable with SysLink connectors for EduTrainer® at both ends (order no. 034031/167197) or with SysLink connectors at one end and open cable end sleeves for any PLC (order no. 167122)

 
Process model Digital simulation box (order no. 170643) or Digital/analog simulation box (order no. 526863)

2. Control of virtual processes
Industry-oriented, cost-effective PLC training by means of simulation software, e.g. CIROS®.

d573882uc.jpg
EduTrainer® or PLC of your choice

       d167197g.jpg

I/O data cable with SysLink connectors for EduTrainer® at both ends (order no. 034031/167197) or with SysLink connectors at one end and open cable end sleeves for any PLC (order no. 167122)

d548687c_2_200.jpg 
Interface EasyPort USB (order no. 548687)

Ciros Screen 2012.jpg

Simulation software:

  • CIROS®
  • FluidSIM®
  • EasyVeep

3. Process model: Control of actual modules
Using equipment sets and MPS® stations.

d573887uc_1.jpg
EduTrainer® or PLC of your choice

      d167197g.jpg

I/O data cable with SysLink connectors for EduTrainer® at both ends (order no. 034031/167197) or with SysLink connectors at one end and open cable end sleeves for any PLC (order no. 167122)


d167091uc_80mm_breit.jpg 

Cable set with safety plugs (order no. 167091)

  

Process model:

  • Equipment sets and, MPS® stations
  • Connected Learning Tec2Screen®