EduTrainer® Universal Preferred versions Laboratory: A4 rack with SIMATIC S7-1200 and 19" simulation modules

EduTrainer® Universal Preferred versions Laboratory: A4 rack with SIMATIC S7-1200 and 19

The modular mini control system from Siemens

For solutions in discrete and stand-alone automation applications in the lower performance range.

The SIMATIC S7-1200 controller family has an integrated engineering system: SIMATIC STEP 7 Basic for controllers and HMI

 

 

 

 



 

EduTrainer® Universal with:

CPU S7-1214C

  • 75 kByte main memory, 4 MByte program memory
  • Interface: RJ45

Inputs/outputs:

  • 14 digital inputs (24 V DC)
  • 10 digital outputs (24 V DC, 500 mA)
  • 2 analog inputs, 10 bit (0 – 10 V)

CPU module:

Analog output SB 1232 AQ

  • AO 1 x 12 Bit (± 10 V DC/0 – 20 mA)

 

The holder system

  • EduTrainer® Universal, size 1, W x H 305 x 300 mm
  • 19" module simulation plate with 2 x SysLink plug connector for MPS® station and control panel, each with 8 digital inputs and 8 digital outputs and 1 x Sub-D 15-pin plug connection with 4 analog inputs and 2 analog outputs; emergency stop jumper to connect a safety circuit for disconnecting 8 digital outputs.
  • Integrated 110/230 V/24 V, 4 A power supply unit
  • Can be placed on a desk or in an MPS® station
  • Stable, powder-coated, sheet-steel holder system
  • Can be expanded with 19" simulation modules (only order no. 567242)

Order no. 567240 includes all the required equipment with simulation modules:

  • 19" module 16IN (12 HP), 16 digital inputs on 4 mm safety sockets and 16 switches/pushbuttons for signal simulation
  • 19" module 16OUT (12 HP), 16 digital outputs on 4 mm safety sockets
  • 19" module 4AIN/2AOUT (12 HP), analog processing 4 analog inputs on 4 mm safety sockets can be switched to simulation via potentiometer and 2 analog outputs on 4 mm safety sockets
  • 19" module 24 V/0 V (9 TE), 8 x 4 mm safety sockets, red for 24 V distribution, 8 x 4 mm safety sockets, blue for 0 V distribution

Special license rules apply for schools and educational institutes in the commercial sector.

Notes
Order no. 567240 and 567242 are based on Siemens SCE Trainer Packages and contain six EduTrainers® each, including programming cable (Ethernet cable) and STEP 7 Basic programming software. When Siemens updates these Trainer Packages, the controllers are replaced by the successor models. Subject to technical implementation.

Version

 

Customer Service Line:
Deutschland +49/(0)711/3467-0