Develop the training aims from TP 101 and consolidate your knowledge.
Fully revised: The new workbook contains a series of graduated project exercises based on actual industrial applications and an enhanced section on fundamentals. It also includes a multimedia CD-ROM. The foundation for competent training. Place your order now!
The number of components and the design are specially tailored to the projects contained in the workbook so that the main training aims can be achieved with little outlay. Supplied in the practical Systainer.
Components from the equipment set TP 101 are required to carry out the projects.
Performance through close proximity
Switches and valves should be mounted as close to the actuator as possible for optimum performance. You can now apply the same principle when designing your circuits thanks to the new components that can be plugged in directly. Furthermore, this approach also provides you with an easy way of demonstrating the features of a one-way flow control valve. You can even record the measured values and analyse the results, for example using the new TP 210!
Lever valves
All of the lever valves contained in the training packages 101 and 102 are equipped with a pilot control, which means they require a low actuating force and deliver high reliability.
Training aims
- Binary reducing stages
- End positions without limit switches
- Latching circuits
- Converting 5/2-way valves
- Function of a back pressure end stop
- Basic stepper control (continuous cycle)
- Stepper control with operating modes or idle step
- Setting and coordinating time delays
- Variable step repetition using a predetermining counter
- Input circuit with self-latching loop and auxiliary functions
- Evaluating and using sensors for material sensing
- Realising stepper control with protected pilot air and auxiliary functions
- Proximity sensors in the end positions and in the partial stroke range
- Combined use of quick exhaust valves and pressure regulators
- Inversion of a timer signal
- Varying end-position cushioning
- Using and adjusting different sensor types
An impressive blended learning package for TP
The workbook
Provides detailed descriptions of industry-related projects with problem descriptions, parameters and project orders. Worksheets support the students through the required stages of planning, execution and function testing and provide sample solutions. New topics include economic considerations and notes on safety.
Includes a multimedia-CD-ROM containing photos and videos of industrial applications and circuit diagrams. Theoretical information is conveyed using animated cutaway models for greater comprehension and worksheets and exercise sheets can be reprinted as necessary.
Complementary media
- Design and simulation using FluidSIM®
- Self-tuition program, Pneumatics
- Textbook Pneumatics, Basic level
- Cutaway model case
Recommended accessories
The most important components at a glance
- 3/2-way valve with pushbutton actuator, normally closed (Order no. 152860)
- 3/2-way valve with mushroom-head emergency switch (red), normally open (Order no. 152864)
- 3/2-way roller lever valve with idle return, normally closed (Order no. 152867)
- Back pressure valve (Order no. 152868)
- 3/2-way pneumatic valve, pneumatically actuated, one side (Order no. 539768)
- 5/2-way double pilot valve, pneumatically actuated, both sides (Order no. 539769)
- Shuttle valve, 3-fold (OR) (Order no. 152882)
- Shuttle valve (OR) (Order no. 539771)
- Dual-pressure valve, 3-fold (AND) (Order no. 152883)
- Pneumatic timer, normally open (Order no. 539759)
- Pneumatic preset counter (Order no. 152877)
- Stepper module (Order no. 152886)
- One-way flow control valve (Order no. 539773)
- Non-return valve, delockable (Order no. 540715)
- Double-acting cylinder (Order no. 152888)
- Plastic tubing (Order no. 151496)