FEC® EduTrainer®
The FEC® is a compact and powerful PLC and offers all functions required for automation tasks involving a few I/Os in industrial design:
- Selectable RUN/STOP switch
- 24 V DC sensor power supply
- Value input via potentiometer (suchas for timers)
- Fast counter up to 4 kHz
- Multitasking (64 programs)
- 256 timers, 128 buffered
- 256 16-bit counters, 128 buffered
- 256 data registers, 128 buffered
- 10 000 flag words, 256 buffered
- Digital inputs PNP/NPN: 12
- Signal voltage: 24 V DC
- Power consumption: 7 mA
- Signal delay: 5 ms
- Signal status ON: >15 V DC
- Signal status OFF:< 5 V DC
- Status display: LED per stage
- Operating voltage: 24 V DC
- Digital outputs (load current):
2 relay/NO (maximum 2 A)
6 transistors (maximum 0.5) - Voltage: 30 V DC/250 V AC
- Maximum switching load: 80 VA inductive; 100 W resistive
- Switching time: 10 ms
- Signal display: LED per stage
- Ethernet interface: 1
Functions:
- Functions: 2 x to 4 kHz
- Data memory: 32 kB SRAM, 2 kB buffered in flash memory
- Program memory: 64 kB flash memory
Accessories for programming:
- Programming cable with ConverterTTL-RS232(Order no. 188 935)
- Software FST for IPC/FEC® (see Software chapter)
- MULTIPROG wt software (see Software chapter)
Both the FEC® starter kits FST/MWT and the FEC® EduTrainer® FST/MWT contain the programming cable and the software (see chapter Electronics/PLC controllers).