nabídka
EasyPort brings together the world of software and simulation with actual training equipment. The principle is simple: EasyPort is connected to the PC via the serial RS232 interface and to the automation equipment by means of SysLink sockets. Input and output signals can then be read into and output by the PC. We have developed software with a graphical user interface similar to a clipboard for the device driver to allow the EasyPort adapt to different situations.
We have also preconfigured the most important I/O connections and made them available online for free downloading.
EasyPort digital now includes EasyVeep visualisation software, which comes with practical process models.
The process models can be activated via the EasyPort using an actual PLC. The practical models are documented and meet a broad range of requirements. The topics covered include the following:
- Level crossings
- Multi-storey car parks
- Sorting systems
- Sluice gates
- Lifts
- Washing machines
- 7-segment display
- Garage doors
EasyPort digital
EasyPort digital is the PC interface for the simulated process to
- COSIMIR® PLC
- FluidSIM®
- EasyVeep
or connects
- FluidSIM®
- S7-PLCSIM
as a controller on the PC with the processes.
EasyPort digital also functions as a connection to the process or controller in the world of 24 volts.
With 16 digital inputs and 16 digital outputs (24 V DC, 2 x SysLink sockets).
Includes EasyVeep, the visualisation software with practical process models.
EasyPort digital/analogue
EasyPort digital/analogue is the PC interface for the simulated process to
- COSIMIR® PLC
- FluidSIM®
- EasyVeep
or connects
- FluidSIM®
- S7-PLCSIM
- Fluid Lab® PA or Fluid Lab® P/H
as a controller on the PC with the processes.
EasyPort digital/analogue also functions as a connection to the process or controller in the world of 24 V as well as transmitting 0 – 10 V signals.
With 8 digital inputs and 8 digital outputs (24 V DC, 1 x SysLink socket), 4 analogue inputs (0 – 10 V) and 2 analogue outputs (0 – 10 V).
Accessories, also order:
- 4 mm connecting cable/wire end sleeves (24 V supply), order no. 381525
- RS232 PC data cable (EasyPort with PC on RS232), order no. 162305
- RS232 USB adapter (EasyPort with PC on USB), order no. 540699
- SysLink cable (digital) with plugs at both ends (EasyPort with actual process or SimuBox), order no.034031
- SysLink cable (digital) with plugs at both ends, crossover (EasyPort with actual PLC), order no.167106
- SysLink cable (digital) with SysLink plug at one end and open wire end sleeves (EasyPort can be freely wired to any PLC), order no. 167122
- Analogue cable, parallel (EasyPort with actual process and/or SimuBox), order no. 529141
- Analogue cable, crossover (EasyPort with actual PLC and/or SimuBox), order no. 533039
PLC starter kit
We have put together a starter kit for you with everything you need to get started (section 7), order no 543081.