The MPS® PA closed-loop controller with P, PI or PID control algorithm permits the control of dynamic processes in MPS® PA stations. The controller is a universal multi-channel process and program controller with a registration function for monitoring signal curves. The setpoint specification is transferred to the controller via a 15-pin Sub-D interface. A further 15-pin Sub-D interface senses the actual value and an actuator is controlled using the manipulated variable. Parameterisation and configuration of the controller is possible using the controller itself or using a setup program.
Consisting of:
- Device with dimensions 144 mm x 130 mm for a DIN control panel cut-out measuring 92 mm x 92 mm and an installation depth of 170 mm
- Installed in a 19" control panel
- Interface for RS232 and Profibus DP, effected via a 9-pin Sub-D plug connection
- 4 mm safety sockets for the 24 V voltage supply
- CD-ROM with setup program and programming cable for convenient configuration using a PC
- The device can be integrated in a data network using the PROFIBUS DP interface
- Modules can be retrofitted by the user
- UL certification
System requirement for the setup program:
- PC with Win95, 98, NT4.0, WIN 2000, WIN ME, WIN XP
- At least Pentium 100
- 32 MB RAM
- 15 MB space on hard disk
- CD-ROM drive